Bush Hog 3810

3810 for sale at Dickson County Equipment


Model 3810

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Performance Features
  • Wing skids are 3/8” thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the side-bands.
  • Center section blades properly align with center wheels to closely cut out the bottom of ditches.
  • Grease fittings and spring steel bushings at axle pivot points for longer life.
  • Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
Construction Features
  • Industry first, massive three-inch output shaft with up to 27% more splines than smaller shafts for maximum transmission of torque to blade pan.
  • The Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked as often as you walk around the machine. Never climb onto the cutter again to check the gearbox oil levels.
  • Bush Hog’s E-Z lube drive-lines are quick and easy to service. All grease fittings on the pto CV drive-line and wing drive-lines align for quick location of grease points. Since all grease fittings on all drive-lines are in an up position on every 5th revolution, service times are reduced.
Cutting Width 10 ft. 6 in.
Cutting Height 2 in. to 14 in.
Hitch Perma-Level or Ball Hitch
Minimum Tractor PTO HP 60HP
Side Band 1/4 In. x 12 in.
Blade Pan Round, replaceable, bolt-on
PTO Driveline EZ Lube ASAE CAT6, CV
Wing Drivelines EZ lube, ASAE Cat. 5
Wing Flex 22 degrees down/87 degrees up
Wing Free Float 22 degrees down/45 degrees up
Splitter Gearbox Rating 250 HP
Cutting Gearbox Rating 225 HP
Gearbox Warranty 6 Years
Blade Tip Speed 16,000 feet per minute
Cutting Capacity 4 1/2 in.
Top Deck Center Section 11 ga.
Bottom Deck Center Section 7 ga.
Deck, Wings 7 ga.
Axle Cushions Spring at each wheel
Main Axles, greaseable with bushings 3/8 in. wall tube
Axle Arms, greaseable with bushings 3 1/2 in. x 3 1/2 in.